How To Build A Light Stand

The construction of lighting racks is a relatively complicated matter, and the construction methods used for different lighting racks are different. For example, the materials required to build a 12*6*6 meter lighting stand: 12 aluminum alloy trusses of 3 meters, 8 aluminum alloy trusses of 2 meters, 8 aluminum alloy trusses of 1 meter, 8 diagonal supports, and 4 iron bases , 4 reverse heads, 4 square sleeves, 4 cross arms, 4 slings, 4 hoists, screws, etc.

1. First, place the four bases in the approximate position on the ground, and then adjust the legs below so that they are on the same level.

2. Then insert the bottom part of the diagonal support on the outside of the base on the four corners, preferably two or more per corner.

3. Next is the beam part. First connect the beam on the ground, and then connect the two ends of the beam to the two square sleeves on both sides, so that the beam part is assembled on the ground.

4. Connect the column truss lying flat, then screw one end on the reverse head, screw the other end on the cross arm, and at the same time link the hanging hoist and the cross arm, the function of the hoist is to lift the lower beam truss .

5. Slowly erect the column truss. One more person is required to operate here. Be careful not to use too much force, and then fix the screws on the reverse head.

6. After the column is finished, use the hook under the hoist to hook the beam below through the sling, and several people slowly pull the hoist to pull the beam to the left and right of the person's head.

7. Tighten one end of the oblique support and the column, and the other end and the horizontal support of the base, so that the gantry is completed.