Reliable aluminum alloy truss structure to ensure safety

Nowadays, the construction of many stages is indispensable to the stage aluminum alloy truss, because it is fixed by welding on four sides, so it is stronger than the usual double-sided welding in the past, so as to ensure the safety of the stage and avoid the hidden safety hazards in the past.

The stage aluminum alloy truss adopts the aluminum alloy material made of the international standard strength standard as the basic component. The solder joints are relatively uniform, and there are special technical personnel to check, and the whole production process is checked, which can ensure the stage aluminum alloy truss. Safety.

Moreover, when the stage aluminum alloy truss is made, there is a very precise process. After the appearance is polished, it is cleaned with a special potion. All of these are processed in a standardized manner, without cutting corners to ensure the safe use of this material. The stage aluminum alloy truss has also added some other specifications in the production to ensure the appearance.

Focus on the welding requirements of the joint ring seam in the stage aluminum alloy truss. The entire aluminum alloy truss is composed of the junction plate and the aluminum alloy aluminum alloy truss web and chord connected to it, usually on the junction plate. There are two grooves, one of which is for the chord to be implanted and connected, and the other for the abdominal bar to be implanted and connected.

The chord is connected to the junction plate by bolts or rivets, and the web is also connected to the junction plate by bolts or rivets, so that the junction plate is connected to the aluminum alloy rods in the horizontal, vertical and oblique directions, so as to obtain the force. Reasonable, reliable structure, easy to design, manufacture and construct stage aluminum alloy truss.

The welding requirements of pipes and joints in the stage aluminum alloy truss are to use special welding equipment. According to the welding sequence requirements, a programmable controller is used to control the logic sequence of the welding equipment. Ensure welding quality.