What Is A Truss Made Of
Apr 04, 2022
1. A truss bridge is a form of bridge.
2. Truss bridges are generally more common in railways and highways; they are divided into two types: upper chord and lower chord.
3. The truss is composed of upper chord, lower chord and web rod; the form of web rod is divided into inclined web rod and straight web rod; because the rod itself is relatively long and thin, although the connection between the rods may be "fixed", However, the actual rod end bending moment is generally very small, so the design analysis can be simplified as "hinged". When simplifying the calculation, the rods are all "two-force rods", which are subjected to pressure or tension.
4. Since the span of the bridge is large, and the rigidity of the single truss "out-of-plane" is relatively weak, therefore, the "out-of-plane" needs to be supported. When designing a bridge, the "out-of-plane" is generally designed in the form of a truss, so that the bridge forms a whole with good stiffness in both directions.
5. Some bridge decks are set on the top chord, so the force is mainly transmitted through the top chord; some bridge decks are set on the bottom chord. Due to the requirement of out-of-plane stiffness, the top chords still need to be connected to reduce the calculated length of the top chord outside the plane.
6. The chord of the truss is relatively large in the mid-span part, and gradually decreases in the direction of the support; while the force of the web member is mainly in the attachment of the support, and the force of the web member in the mid-span part is relatively small, even some The theoretical "zero pole".





