Aluminum alloy scaffold composition

  What parts are the aluminum alloy scaffolding mainly assembled from?

  As we all know, aluminum alloy scaffolding is a product that is freely constructed according to the needs of the operation. In short, aluminum alloy scaffolding belongs to an assembly product, which is built by a combination of various accessories, rather than a single product. So, what parts are the aluminum alloy scaffolding mainly assembled from?

On the whole, the components of a completed aluminum alloy scaffold should include: frame, cross tie rod, inclined tie rod, H guardrail, baseboard, platform board (must ensure that at least one platform board per 2 meters height), universal casters, adjustable legs, diagonal support, etc. Details are as follows:

  1, aluminum frame: the general aluminum alloy scaffolding frame is mainly made of φ50.8xδ2 or φ50.8xδ1.8 aluminum alloy round pipe welded, aluminum set up 3, 4, 5 horizontal pipe and 2 level frame designed for guardrail use, each level of horizontal pipe can be placed on the platform plate, the interval is 460mm. The height of the frame is common: 5 level frame: 2.32 meters, 4 level frame: 1.85 meters, 3 level frame 1.39 meters, and 2 level frame guardrail: 0.85 meters.

  2, cross bar: aluminum alloy scaffolding mainly depends on the transverse and diagonal tie rod for the combination of the overall structure, the number of cross bar and the construction method have an important role in the stability of the overall structure of aluminum alloy scaffolding. Among them, the two ends of the cross bar hook has a self-locking function; The end hook is made of high-quality casting aluminum alloy, which has the characteristics of high strength to ensure the safety of the tower.

  3, baseboard: assembled in the operation level around the platform board, the platform board is closed around the board, can effectively prevent the tools placed on the platform board from falling, and ensure that the personnel work on the platform board, to prevent the foot from stepping empty, accidents.

  4, platform board: divided into open platform board, standard platform board two kinds, using aluminum alloy frame and multi-layer adhesive waterproof and non-slip, flame proof high-density plate riveting assembly combination.

  5, the external support rod: the external support rod is used to support the aluminum alloy scaffold at four corners, which is used to fix the bottom of the scaffold, to ensure the stability of the entire scaffold, and the operation is simple and convenient.

  6, universal casters: aluminum scaffolding regular casters use European casters, a single castor bearing up to 800KG, and the outer ring of the castor is also wrapped with polyurethane to prevent scratching the ground.

  7, adjustable legs: casters are also installed with adjustable screws, which can be adjusted appropriately to ensure that the scaffold is suitable for different heights of the ground environment, adjustable foot length 600mm, of which 300mm with screws, the remaining 300mm without screws.

  8, safety buckle: The safety buckle is used for the connection and locking between the upper and lower door frames, and the role is to locate the door frame and lock the door frame to prevent the door frame from falling off.

  The introduction of these accessories is about the assembly of aluminum alloy scaffolding, can be further understood first, so as to better buy and build aluminum alloy scaffolding.